Small MOQ and IATF16949 passed metal Bushing sleeve for Automatic liquid filling machine

Material of bushing

The material of the liner is soft metal, rubber, nylon and non-metal polymers, which are relatively soft and low in price. In all kinds of bad working conditions, the bush is subjected to vibration, friction and corrosion to protect the wrapped parts, and the lining itself is convenient, low cost and good economy after the damage.

selection factor of bushing

The range of the liner is large and the variety is much larger, and the suitable liner must be selected, and the purpose of the liner must be considered, and different conditions will be chosen for different models. The main consideration of the liner selection is the pressure, speed, pressure velocity and load properties of the liner. In addition, the condition of lubrication and lubrication of the liner is determined by its use and life.

Protection: prevent the swelling of the casing when installed. On the machine that is in the outdoor operation or working environment, the surface and bolts should be coated with anti-rust oil and grease, which should be used for the better expansion form of anti-rust. The expansion is a new advanced mechanical foundation. It is a new type of non-bonding device that is widely used in the international system to realize the machine and shaft, and tighten the pressure and friction of the tolerance surface by tightening the 12.9 high strength screw

JESENTECH GROUP CORPORATION is a manufacturer of special-shaped shaft fastener R & D and system Made with well-equipped testing facilities and strong technical force.

With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in Automation equipment, robotics, medical treatment, automobiles, marine railways, bridges, buildings, structures, tools, instruments, instruments, etc. and other industries.

Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.

The products we can produce and process are Locating/Positioning Pins/Cylindrical Pins/Lead/Slide Screw/Bushings/Linear Shafts/Plungers Screws/Screws and Bolts/Nuts/Circular/Hexagon Posts/Washers/Floating Joints/Cantilever shafts/Knurled Knobs/Screws/Air Tool /Quick Couplers etc...

We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!